Adjusting Equalizer Curves; Adjusting Loudness - Pioneer KEH-P4020 Mode D'emploi

Audio Adjustments

Adjusting equalizer curves

You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in
1 Press to select the equalizer mode.
AUDIO
Press until
AUDIO
the display.
2 Select the band you want to adjust with
the 2/3.
—
EQ-L (low) EQ-M (mid)
3 Press 5 or ∞ to adjust the equalizer curve.
Each press of 5 or ∞ increases or decreases
the equalizer curve respectively.
• – is displayed as the equalizer curve is
+6 –6
increased or decreased.
• The actual range of the adjustments are differ-
ent depending on which equalizer curve is
selected.
Notes
• If you make adjustments when a curve other
than
CUSTOM
curve will replace the previous curve. Then a
new curve with
play while selecting the equalizer curve.
• You can create different
different sources.
• The CD player (one disc only) and multi-CD
player are set to the same equalizer adjust-
ment setting automatically.
17 En
CUSTOM
appears in
EQ-L/EQ-M/EQ-H
—
EQ-H (high)
is selected, the newly adjusted
appears on the dis-
CUSTOM
curves for
CUSTOM

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
.
1 Press
AUDIO
Press
AUDIO
2 Select
3 Select the desired level with 2/3.
LOW (low)
Note
• You can also switch
ing the
LOUDNESS
to select
LOUD
until appears in the display.
LOUD
on or off with 5/∞.
LOUD
— —
MID (mid) HI (high)
on or off by press-
LOUD
.
.