50-Disc Multi-Cd Player; Repeating Play; Playing Tracks In A Random Order; Scanning Cds And Tracks - Pioneer KEH-P4020 Mode D'emploi

Multi-CD Player

50-disc multi-CD player

Only those functions described in this manual
are supported for 50-disc multi-CD players.

Repeating play

There are three repeat play ranges for the multi-
CD player: Multi-CD player repeat, one-track
repeat, and disc repeat.
Press
REPEAT/RANDOM
range.
Press
REPEAT/RANDOM
repeat range appears in the display.
•
Nothing's displayed
the multi-CD player
• — Repeat just the current track
RPT
• — Repeat the current disc
DISC
Notes
• If you select other discs during repeat play,
the repeat play range changes to multi-CD
player repeat.
• If you perform track search or fast
forward/reverse during
repeat), the repeat play range changes to
(disc repeat).
DISC
to select the repeat
until the desired
— Repeat all discs in
(one-track
RPT

Playing tracks in a random order

Random play lets you play back tracks in a ran-
dom order within the repeat range, multi-CD
player repeat and disc repeat.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press and hold
REPEAT/RANDOM for about
to turn random play on.
two seconds
(random playing in a disc) or
DRDM
dom playing in a magazine) appears in the dis-
play. Tracks will play in a random order within
the previously selected multi-CD player repeat
or disc repeat ranges.
3 Press and hold
REPEAT/RANDOM for about
to turn random play off.
two seconds
Tracks will continue to play in order.

Scanning CDs and tracks

While you are using
DISC
beginning of each track on the selected disc
plays for about 10 seconds. When you are using
multi-CD player repeat, the beginning of the first
track of each disc is played for about 10 sec-
onds.
(ran-
RDM
(disc repeat), the
En
14