Cd Player; Playing A Cd; Repeating Play - Pioneer KEH-P4020 Mode D'emploi

CD player

Playing a CD

1
You can use this unit to control a CD player (one
disc only), which is sold separately.
1
TRACK NUMBER
Shows the track currently playing.
2 indicator
PLAY TIME
Shows the elapsed playing time of the cur-
rent track.
1 Press
SOURCE
disc only).
2 Use to adjust the sound level.
VOLUME
When you press
VOLUME
raised and when pressed down/–, the volume is
lowered.
3 To perform fast forward or reverse, press
and hold 2 or 3 .
4 To skip back or forward to another track,
press 2 or 3 .
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Note
• If the built-in CD player does not operate prop-
erly, an error message such as
be displayed. Refer to the CD player owner's
manual.
11 En
2
indicator
to select the CD player (one
up/+, the volume is
ERROR-14

Repeating play

Repeat play lets you hear the same track over
again.
1 Press
REPEAT/RANDOM
on.
appears in the display. The track presently
RPT
playing will play and then repeat.
2 Press
REPEAT/RANDOM
off.
The track presently playing will continue to play
and then play the next track.
Note
• If you perform track search or fast forward/
reverse, repeat play is automatically
cancelled.
may
to turn repeat play
to turn repeat play