Publicité
Les langues disponibles
Les langues disponibles
Software operation
7.2.2
Querying operating hours and centrifugation runs
7.2.3
Audible signal
7.2.3.1
General
28 / 39
[SELECT] button.
6.
Press the
�� The continuation of the centrifuge type number
played.
[SELECT] button.
7.
Press the
�� The date of manufacture
[SELECT] button.
8.
Press the
�� The centrifuge serial number
[SELECT] button.
9.
Press the
�� The type of frequency converter
played.
10.
Press the
[SELECT] button.
�� The program version of the frequency converter
centrifuge is displayed.
[STOP/OPEN] button twice to exit the '-> Info' menu
11.
Press the
or
[STOP/OPEN] button three times to exit the '*MACHINE
Press the
MENU*' .
The operating hours are divided into internal and external operating hours.
■
Internal operating hours: Total time for which the device has been
switched on.
■
External operating hours: Total time of centrifugation runs to date.
The rotor is stationary.
1.
Press and hold the
'*MACHINE MENU*' is displayed after 8 seconds.
��
2.
Press the
[SELECT] button repeatedly until '-> Time & Cycles' is
displayed.
[START/PULSE] button.
3.
Press the
'TimeExt=' is displayed.
��
TimeExt: External operating hours
[SELECT] button.
4.
Press the
'TimeInt=' is displayed.
��
TimeInt: Internal operating hours
[SELECT] button.
5.
Press the
'Starts=' is displayed.
��
Starts: Number of all centrifugation runs
[STOP/OPEN] button twice to exit the '-> Time & Cycles'
6.
Press the
menu
or
[STOP/OPEN] button three times to exit the '*MACHINE
Press the
MENU*' .
The audible signal sounds:
Rev.: 10 / 11.2023
'Date:' of the centrifuge is displayed.
'Serial#:' is displayed.
'FC type' of the centrifuge is dis-
[SELECT] button.
'Type#2:' is dis-
'FC FW=' of the
AB1801en
Publicité
