Publicité
Les langues disponibles
Les langues disponibles
WALL MOUNT INSTALLATION - TOOLS AND MATERIALS REQUIRED
•
Electrical drill or ratchet driver
•
½" drill bit for drilling pilot holes
•
1 ¼" drill bit for drilling electrical wiring access
hole (if applicable)
•
Phillips screwdriver #2 or driver bit
•
Wire stripper or cutter
•
Tape measure
•
Aluminum foil tape and/or duct tape
WALL MOUNT INSTALLATION - PARTS SUPPLIED
1 × Hood
PRE-INSTALLED
2 or 4 × LED Lights
(1.5W per bulb)
*Bulb & socket may change.
4 × Mounting Screws
(Long and Medium, 2 each)
2 × Top Chimney Screws
1 × Round Adapter
(May be Pre-Installed)
1 × Oil Cup
HARDWARE PACKAGE
4 × Drywall Anchors
(Large and Small, 2 each)
FOR PYRAMID SHAPE HOODS ONLY:
2 × Bottom Chimney Screws
•
Electrical supplies for wiring (i.e. marrets,
electrical tape)
•
Hammer
•
Jigsaw or saber saw
•
Drywall stud (if applicable)
•
Step ladder
•
Stud finder
•
Level
1 × Chimney Flues
(Top and Bottom)
1 × Plastic Adapter Seal
2 × Washers
Cyclone Canopy Installation - English
1 × Upper Mounting Bracket
6 × Adapter Screws
7
Publicité
