Technical Specifications; Installation - Oceanic OCEATI2Z2B Guide D'utilisation

Technical specifications

Cooking hob
Cooking zones
Voltage
Electric power installed
Dimensions L×W × H(mm)
Housing dimensions A × B (mm)
The weight and dimensions are approximate. We are continually improving our
products, and we may modify the specifications, designs and models without
notice.

Installation

Choice of installation material
Arrange the work surface in line with the dimensions indicated in the drawing.
For purposes of installation and use a minimum of 5 cm should be kept round the
hole.
Ensure thickness of work surface is less than 30 mm. Please select materials of
work surface resistant to heat, to prevent deformation caused by heat generated
by the hot hob, as indicated below:
L(mm) W(mm)
288 520
Always ensure the induction cooking hob is well ventilated and air inlet and outlet
are not blocked. Ensure induction cooking hob is in good condition, as indicated
above
H(mm) D(mm)
62.5 58.5
OCEATI2Z2B
2 zones
220-240 V ~50-60Hz
3000-3800W
288 X 520 X 62
268 X 500
A(mm) B(mm)
268 500
22
X (mm)
50 mini