Oceanic OCEATI2Z2B Guide D'utilisation page 39

3. Set the time by touching the "-" or "+" control of the timer
Hint: Touch the "-" or "+" control of the timer
once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer will
decrease or increase by 10 minutes.
4. Touching the heating zone selection control, and then touch the "Timer", the
timer is cancelled, and the "--" will show in the minute display.
5. When the time is set, it will begin to count down
immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator will
illuminate indicating that zone is selected.
6. When cooking timer expires, the corresponding
cooking zone will be automatically switch off and
show "H".
Setting the timer to turn more than one cooking zone
off
1. If more than one heating zone use this function, the timer indicator will show
the shortest time.
(e.g. zone 1# setting time of 3 minutes, zone 2# setting
time of 6 minutes, the timer indicator shows "3".)
NOTE: The flashing red dot next to power level indicator means the timer
indicator is showing time of the heating zone.
If you want to check the set time of other heating zone, touch the heating zone
selection control. The timer will indicate its set time.
16