Restrictions When Using; Locking The Setting Controls; Protection Against Overheating - Oceanic OCEATI2Z2B Guide D'utilisation

4.
If you want to cancel the Boost during these 5 minutes, touch the heating
zone selection button, an indicator next to the key will flash. And then touch
the Boost button. The heating zone will go back to the power stage which was
set before boost.

Restrictions when using

In this hob only the rear zone can work with Boost function. If you need to use
boost, first make sure that the other zone turn off.
Otherwise the
zone and power level

Locking the setting controls

• You can lock the setting controls, in order to prevent accidental use (e.g.
children accidentally switching the cooking zones on).
• When the setting controls are locked, all setting controls except ON/OFF are
deactivated.
To lock the setting controls
Touch the key locking control. "Lo" appears on the timer indicator.
To unlock the setting controls
1. Check the induction cooking hob is switched on.
2. Touch and hold key locking control for a certain time
3. You can now start to use your induction cooking hob.
When the cooking hob is in lock mode, all setting controls are deactivated except
the ON/OFF control, so you can always turn off the induction cooking hob with the
ON/OFF control in case of emergency, but you should unlock the cooking hob
before the next operation

Protection against overheating

An integrated temperature sensor measures the temperature inside the induction
hob. When excessive temperature is measured, the induction hob automatically
halts its operation.
and symbols will flash on the display of the selected
is automatically set.
13