Table Des Matières - ADVANSEA SPEED S400 Manuel Utilisateur

Table of contents
1. Introduction
1.1. General presentation ........................................ p.4
1.2. Components supplied with your Speed S400 ...... p.5
1.3. Technical characteristics ................................... p.5
2. General operation
2.1. Powering on ..................................................... p.7
2.2. Operation in normal mode ................................ p.7
2.2.1. Selecting information on the display
2.2.2. Selecting units of measurement
2.2.3. Resetting data
2.2.4. Countdown timer
2.2.5. Backlighting
2.3. Alarms ............................................................. p.9
2.3.1. Setting the speed alarm thresholds
2.3.2. Setting the battery alarm threshold
2.4. Configuration.................................................... p.11
2.4.1. Speed damping
2.4.2. Calibrating the water temperature
2.4.3. Calibrating by speed
2.4.4. Calibrating by log
2.4.5. Configuring the countdown timer
2.4.6. Simulation mode
2.4.7. Key beeps
2.4.8. Resetting data in the memory
2.5. Standby ........................................................... p.16
2.6. Network operation (Bus AS-1) ........................... p.16
2.7.1. Displaying multiple data
2.7.2. Remote access
2.7. Messages ......................................................... p.17
3. Installation
3.1. NMEA 0183 interfacing ...................................... p.18
3.1.1. NMEA 0183 input interface
3.1.2. NMEA 0183 output interface
3.2. Mounting and connections ................................. p.19
3.2.1. Mounting the Speed S400 unit
Installation and Operation Manual S400 series
2