Preventive And Corrective Maintenance; Cleaning The Stapler; Removing Jammed Staples - Josef Kihlberg JK45-783 Mode D'emploi

Josef Kihlberg JK45-783
KUDA PACKAGING
7
Before all maintenance tasks on the
stapler always first disconnect it from
the air supply.

7.1 CLEANING THE STAPLER

This stapler does not require special servicing. It only
needs regular cleaning with a non-aggressive (non-
corrosive) cleaner agent. Do not remove any parts for
cleaning purposes!
Check the proper functioning of all safety
devices daily. Make especially sure that:
– the trigger works smoothly, the door stays in place
and the magazine lid does not open itself.
– all screws and nuts are securely tightened.
– the stapler is regularly lubricated (refer to chapter
5.2).

7.2 REMOVING JAMMED STAPLES

To remove a staple which has become jammed:
– Open the door by pressing on the upper part on the
catch..
– Remove any staple remnants and push the door
back until the catch has locked.
SERVIS A NAHRADNÍ DÍLY
8
www.kuda-packaging.com

PREVENTIVE AND CORRECTIVE MAINTENANCE

+420 607 237 237
info@kuda-packaging.com
Fig. 9
Fig. 10
servis@josef-kihlberg.eu
06.14