Description Of The Machine - Husqvarna FS 400 LV Manuel D'utilisation

Masquer les pouces Voir aussi pour FS 400 LV:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
maintenance manager, approved dealer, etc . . .).
That the warnings and instructions marked on the
machine
are
protection,
correct
instructions, etc).
That no modification, transformation or addition is
detrimental to safety and that it is carried out
without prior authorization from the manufacturer.
Respect of the maintenance intervals and
periodical checks recommended.
That only genuine spare parts are used for
repairs.
Instruction plate
FAILURE TO COMPLY WITH THESE
WARNINGS
DEATH OR SERIOUS BODILY INJURY.
DO
DO
carefully
read
instructions before operating the saw.
DO
always keep all guards in place.
DO
aways wear safety approved hearing, eye,
head and respiratory protection.
DO
keep all parts of your body away from the blade
and all other moving parts.
DO
know how to stop the saw quickly in case of an
emergency.
DO
shut off the engine and allow it to cool before
refueling.
DO
inspect the blade, flanges and shafts for
damage before installing the blade.
DO
use only blades marked with a maximum
operating speed greater than the blade shaft
speed.
DO
use caution and follow the instructions when
loading and unloading the saw.
DO NOT
followed
(adequate
use,
general
COULD
RESULT
and
understand
DO NOT allow other persons to be near the saw when
personal
DO NOT operate gasoline engines in an enclosed area
safety
DO NOT use damaged equipment or blades.
DO NOT operate the saw in areas of combustible
DO NOT allow blade exposure from the guard to be
DO NOT leave the saw unattended with the motor
DO NOT operate the saw while under the influence of
1 - USE
Use : wet sawing new and old concrete and
asphal
IN
Tools : Diamond Blades - water cooled Ø 350
mm or 400 mm or 450 mm - bore 25.4 mm
(Information from your usual supplier).
3 – DESCRIPTION OF THE MACHINE
all
the
01 - Handle
02 - Lowering wheel
03 - Graduated scale
E
n
g
s i l
h
- 2/6
starting, refueling or when cutting.
unless it is properly vented.
material. Sparks from the saw could cause a
fire or an explosion.
over 180 degrees.
running.
drugs or alcohol.

Publicité

Table des Matières
loading

Table des Matières