General Safety Instructions; Special Instructions - Husqvarna FS 400 LV Manuel D'utilisation

PREFACE TO THE MANUAL
Before leaving our factory every machine passes an
exacting inspection programme in which everything is
checked minutely.
Following the instructions will ensure that your machine
gives long service, in normal operating conditions.
The user advice and spare parts mentioned in this
document are given as an indication, and do not
constitute an undertaking. No warrantee will be granted
in the event of errors or omissions, or for damage
occurring during delivery, or caused by the design or
use of the machine. We are very concerned about the
quality of our products and we reserve the right to
make any technical modifications to improve them,
without warning.
This document will:
provide the user with: information about the
•
machine
information about its possible uses
•
prevent accidents due to unsuitable use, by an
•
untrained person, during maintenance, repairs,
overhauls, handling or transport
improve the reliability and durability of the
•
machine
ensure correct use, regular maintenance, and
•
fast fault finding in order to reduce repair costs
and downtime.
The manual
available at the place of work.
It should be read and used by any
person
machine.
should always
installing or using
The obligatory technical regulations in
force
machine is used must also be adhered
to for maximum safety.

GENERAL SAFETY INSTRUCTIONS

The use of symbols on machines (in color) and in the
manual identify advice concerning your safety.
WARNING
Danger symbol
OBLIGATION
Blue background, white marking :
obligatory safety
+ red marking : movement forbidden
WARNING
Black triangle and marking on a yellow
background : danger if not adhered to.
Risk of injury to the user or third
parties, with possibility of damage top
the machine or the tool.
INTERDICTION
Red circle with or without bar : use or
presence prohibited.
INDICATION
Information
instructions
be
inspection.
This
the
machine is in conformance with the
applicable European directive.
The manufacturer
resulting from improper use, or modifications.

SPECIAL INSTRUCTIONS

The disc cutter is designed to provide safe and reliable
service in operating conditions corresponding with the
instructions, but it can present dangers for the user and
risks of damage, consequently regular on site
inspection is necessary to ensure :
Perfect technical condition (use for the purpose
•
for which it is intended and taking into account
any risks, and correction of any malfunction
detrimental to safety).
Use a diamond disk for cutting with water (sawing
•
new or old concrete, tarmac or asphalt). No other
type of disk is allowed (abrasive, saw, etc . . .).
Competent staff (qualifications, age, training) who
•
have read and understood the manual in detail
before starting work : any electrical, mechanical
or other problem should be investigated by a
qualified maintenance engineer (electrician
E n g s i l h - 1/6
in the country where
- Instruction:
concerning
symbol indicates
declines any responsibility
the
special
use and
that the