Confi Guring Date/Time Settings; Confi Guring Source Settings; Confi Guring Other Settings; Operation - Saba SVD2630 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Press
OK button while the Format Disk option is
highlighted. A menu will appear on the screen,
requiring you to enter a pin number. If you have not
changed the pin number, the factory default is 0000.
After you enter the pin, a pop-up menu appears on
the screen to ensure that the hard disk should be
formatted, select "YES" and press OK to format
the hard disk. Select "NO" and press OK to cancel.
Ensure you back up important recordings before you
format the USB disk unit.
Hard Disk Info
To view the details about the USB disk, highlight Hard
Disk Info by using " " or " " key and press OK. USB
disk information will be displayed:
Confi guring Date/Time Settings
Select Date/Time in the Settings menu to confi gure
Date/Time settings. Press OK button.
Use "
" or " " buttons to highlight Date/Time.
Date,Time,Time Settings Mode and Time Zone Setting
will be available.
Use " " or " " buttons to highlight the Time Settings
Mode. Time Settings Mode is set using " " or " "
buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Date/Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone can be altered:
• By pressing " " or " " buttons select Time Zone.
Use " " or " " buttons to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top
of the menu list will then change according to the
selected Time Zone.
Changes are automatically stored. Press
exit.
02_[GB]_MB60_(01-TV)_1900UK_PVR_ypbpr_26884W_BRONZE17_10072935_50189090.indd 72
02_[GB]_MB60_(01-TV)_1900UK_PVR_ypbpr_26884W_BRONZE17_10072935_50189090.indd 72
Confi guring Source Settings
You can enables or disable selected source options. The
TV will not switch to the disabled source options when
SOURCE button is pressed.
Select
Sources in the Settings menu and press OK
button.
Press"
" or " " buttons to select a source.
Use "
" or " " button to enable or disable the
selected source. Changes are automatically
stored.
Confi guring Other Settings
To view general confi guration preferences, select Other
Settings in the Settings menu and press OK button.
MENU to

Operation

Press "
" or " " buttons to select an item.
Use "
" or " " button to set an option.
Press
OK button to view a sub-menu.
Menu Timeout: Changes timeout duration for menu
screens.
English - 72 -
01.06.2011 11:49:16
01.06.2011 11:49:16

Publicité

Table des Matières
loading

Table des Matières