Cleaning; Assembling Your Coffee Grinder; Using Your Coffee Grinder's Control; After-Sales Service - Graef CM 201 Mode D'emploi

Masquer les pouces Voir aussi pour CM 201:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16

CLEANING

Before cleaning, turn off and unplug the appliance.
Remove Bean container by turning it counterclockwise until loose.
Remove the Coffee container and lid assembly.
Remove lid and lid cap.Wash removable parts by hand or in the dishwasher.

ASSEMBLING YOUR COFFEE GRINDER

Place the coffee grinder base on a flat, level surface. Carefully screw in the assem-
bled bean container into the well on the top of the coffee grinder. Place the lid
onto the top of the bean container. Plug the appliance into a 220-240 Voltage 50
- 60 Hz AC outlet only. Your coffee grinder is now ready for use.

USING YOUR COFFEE GRINDER'S CONTROL

The control buttons are located on the top of the coffee grinder.
Make sure that the appliance plug is not plugged in.
Place the bean container on top of the coffee grinder.
Turn the bean container clockwise until you hear it click into place.Now turn the
bean container to fine and then to the desired grind.
Insert the ground coffee container. Make sure that the lid of the ground coffee
container is in place. The machine will not work without the lid.
Remove the lid of the bean container.
Fill the bean container and make sure that the lid is securely closed (maximum
filling is approx. 225 g).
Insert the plug into the socket.
Turn the bean container clockwise for a finer grind and anticlockwise for a coar-
ser grind. Note: Use a coarser grind for percolator/french press, medium grind for
filter coffee machines and fine grind for espresso.
Set the Start / Stop button to the desired number of cups.
Press the Start / Stop button and then release the button, the grinding process
begins. Please note: The coffee grinder can only be operated when the coffee
bean container and the ground coffee container are properly inserted.
The grinding process ends automatically after completion.
Briefly press the Start / Stop button to stop the machine immediately.
Remove the ground coffee container and brew your coffee with freshly ground
coffee.

AFTER-SALES SERVICE

If your Graef unit is damaged, please get in touch with your specialist dealer or
with a Graef after-sales service at +49 (2932) 97 03 677 or write an e-mail to
service@graef.de.
14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cm 202Cm 203

Table des Matières