Télécharger Imprimer la page

Candy CDSN 2D520PX/E Mode D'emploi page 83

Publicité

Les langues disponibles

Les langues disponibles

Make sure carpets or rugs do
not obstruct the base or any of
the ventilation openings.
After installation, the appliance
must be positioned so that the
plug is accessible.
Do not leave the door open in
a horizontal position, in order
to avoid potential dangers (e.g.
tripping).
For further information on the
product or to consult the technical
data sheet, please refer to the
manufacturer's website.
For the maximum number of
place settings, see the relevant
data plate attached to the product.
Electrical
connections
safety instructions
The technical details (supply voltage
and power input) are indicated
on the product rating plate.
Make sure that the electrical
system is earthed and complies
with all applicable laws, and
that the socket is compatible
with the plug of the appliance.
The manufacturer declines all
responsibility for any damage
to people or property due to
non-earthing of the machine.
Ensure that the dishwasher
does not crush power cables.
In general it is not advisable to
use adaptors, multiple plugs
and/or extension cables.
WARNING:
The appliance must not be
supplied through an external
switching device, such as a
timer, or connected to a circuit
that is regularly switched on
and off by a utility.
Before cleaning or maintaining
the dishwasher, unplug the
appliance and turn off the
water supply.
Do not pull on the power cord
and
or appliance to unplug the
machine.
WARNING:
Water may reach very high
temperatures
wash cycle.
Do not leave the appliance
exposed to the elements (rain,
sun, etc.).
Leaning or sitting on the open
door of the dishwasher could
cause it to tip over.
83
during
the

Publicité

loading