Publicité
Les langues disponibles
Les langues disponibles
CLEANING AND CARE
SPRAY ARMS
The upper and lower spray arms can be removed for
cleaning.
Periodically check whether the holes for the upper and
lower spray arms are clogged. If you see any clogging,
remove the spray arms and clean them under running
water.
The impellers should be cleaned once a week for the
appliance to operate efficiently.
To remove the lower spray arm:
1) Pull the spray arm upwards (A, B).
2) Place under running water and use a paper clip or
similar to remove debris from holes.
To remove the upper spray arm:
1) Turn its nut to the left (A, B).
2) Place under running water and use a paper clip or
similar to remove debris from holes.
Fig. 67
Fig. 68
Make sure to tighten the nut well when reinstalling the
upper spray arm.
Fig. 69
Fig. 70
Fig. 71
49
Publicité
