INSTALLATION
GARBAGE
WITH AN AIR
DISPOSAL
•
A Air gap
•
B Drain hose
•
C Hose clamp
Purge the water supply prior to final connection to the unit.
This will remove any debris that may be present in the
tubing when installing the new water supply. Connect the
braided tubing from the unit to the household water supply
with the fitting provided.
Check all water supply fittings for leaks.
E W
A
B
E W
•
A TOP VIEW
•
B FRONT VIEW
To connect the water mains to the water
inlet valve thread, use a 3/8" water inlet
W
hose and 3/4" metal adapter with a length of
60" (1524) (not supplied).
WITHOUT AN
GAP
AIR GAP
A
B
C
2"
50
E W
3 15/16"
100
E W
Fig. 7
13