Publicité
Les langues disponibles
Les langues disponibles
USE
RINSE-AID USAGE
Rinse-aid helps dry the dishes without streaks or stains.
Rinse-aid is required for stain-free utensils and clear
glasses and is automatically released during the hot rinse
phase.
If rinse-aid dosage is set too low, white stains will remain on
glasses and dishes. If rinse-aid dosage is set too high, light
blue stains will remain on glasses and dishes.
CAUTION
Only use rinse-aid intended for residential
dishwashers.
Filling
the
detergent will damage the dispenser.
NOTE
When the rinse-aid indicator lights up, the
rinse-aid dispenser contains enough rinse-
aid for 2 - 3 programs only. When using
"Tab" detergents, rinse-aid is not needed.
rinse-aid
dispenser
FILLING THE RINSE-AID AND SETTING
A
with
1) To fill the rinse-aid compartment, open the rinse-aid
compartment cap (Fig.A)
2) Fill the compartment with rinse-aid to the MAX level and
then close the cap. Be careful not to overfill the rinse-aid
compartment and wipe any spills.
3) Close the cap until it clicks.
In order to change the rinse-aid level, follow the steps
below:
1) Turn on the machine and press the Extra Dry button for
3 seconds to enter Menu settings: the water hardness
level will appear on the display (SL1 is the factory
setting)
2) Press the Delay (+) button to move to the rinse-aid
setting (r:4is the factory setting)
3) Then, press the Half Load button once and the rinse-aid
level (e.g. r:4) will start flashing
B
Fig. 65
45
Publicité
