Publicité
Les langues disponibles
Les langues disponibles
USE
MENU SETTINGS
Press the Extra Dry button (6) for 3 seconds to enter the
menu. The water hardness setting (e.g. SL1) will appear on
the display. Press the Delay buttons (4) to navigate the
menu. Then, press the Half Load button (5) to enter the
levels of the setting you want to change in the menu. Now,
the display (3) will start flashing, which means this setting
can be changed by pressing the Delay buttons(4). Set the
new level with the Delay buttons(4) and press the Half Load
button (5) to save the new level. After that, the display (3)
will light up steadily, which means this setting level is
saved. You can change another setting with these steps or
exit the menu by pressing the Extra Dry button (6) for 3
seconds or turning off/on.
NO
SETTING
Water
1
Hardness
2
Rinse-aid
Buzzer
3
Sound
Control
Start
4
Program
Save Power
5
Mode
Factory
6
Settings
*Default setting
42
DESCRIP-
OPTIONS
TION
SL1*
SL2
Set the
SL3
water
SL4
hardness.
SL5
SL6
r:1
r:2
Set the
amount of
r:3
rinse-aid.
r:4*
r:5
b:0
Set the
b:1
buzzer
b:2
sound level.
b:3*
LP0*
Set a
default
program for
when the
LP1
appliance is
switched on.
SP0
Set Save
Power
SP1*
Mode.
SP2
FS0*
Restore
changed
settings to
FS1
factory
settings.
1) Water Hardness
To change the water hardness setting, see paragraph
WATER HARDNESS TABLE.
2) Rinse-aid
To change the rinse-aid setting, see paragraph RINSE-
AID USAGE.
3) Buzzer Sound Control
To change the buzzer sound control, see "Menu
Settings". "b:3" level is the highest sound level. ''b:0''
level means all sounds are off.
4) Start Program
To change the start program selection, see "Menu
Settings". In level "LP0", the machine turns on with
Regular program. In level "LP1", the machine turns on
with last selected program and option.
5) Save Power Mode
To change the save power mode setting, see "Menu
Settings". In level "SP0", interior lights (if available) will
always be off, the screen will turn off after 4 minutes, and
the machine will turn off after 15 minutes of no activity in
order to save energy. In level "SP1", interior lights will
turn off after 4 minutes when the door is opened, the
screen will turn off after 4 minutes, and the machine will
turn off after 15 minutes of no activity in order to save
energy. In level "SP2", when the machine is in the off
position, interior lights will turn off after 4 minutes when
the door is opened. When the machine is in the ON
position, interior lights are on as long as the door stays
open and the machine will not turn off except by
pressing the On/Off button.
6) Factory Settings
To change the factory settings, see "Menu Settings". If
you change the level to "FS1" in factory settings, all
settings return to the default setting.
Publicité
