Publicité
Les langues disponibles
Les langues disponibles
USE
4) Change the rinse-aid level by pressing the Delay buttons
The factory setting is "4".
NOTE
If the dishes are not drying properly or
are spotted, increase the level. If blue
stains form on your dishes, decrease the
level.
LEVEL
Rinse-aid not
1
dispensed
1 dose is
2
dispensed
2 doses are
3
dispensed
3 doses are
4
dispensed
4 doses are
5
dispensed
5) Press the Half Load button again to save desired level:
the newly selected level will stop flashing
6) Exit Menu settings by pressing the Extra Dry button for 3
seconds or turn the machine off.
46
BRIGHTENER
INDICATOR
DOSE
r:1 is shown on
the display.
r:2 is shown on
the display.
r:3 is shown on
the display.
r:4 is shown on
the display.
r:5 is shown on
the display.
SALT DISPENSER (FOR MODELS WITH
WATER SOFTENER)
Please check the salt indicator on the control panel to see
whether there is enough softening salt in the dishwasher.
The salt dispenser must be refilled with salt whenever the
salt warning indicator appears on the control panel of your
machine.
Publicité
