Bertazzoni DW24T3IXT Manuel D'installation page 41

USE
WASH OPTIONS
OPTION
Half Load Directs wash functions to either the upper
rack, lower rack, or both. Shortens the
selected cycle wash time and reduces
energy and water consumption.
Sanitize 1 Ensures maximum hygiene with increased
rinse water temperature to eliminate
bacteria up to 99.9%.
Increases wash time and water
Scrub
temperature to reach optimal washing
conditions and perfectly dissolve the
detergent.
Extra Dry Adds extra heating and drying steps to the
selected wash cycle to get perfectly dry
dishes. Increases the rinse water
temperature and extends the dry time.
Delay Delays the start of the selected wash cycle
by 1-24 hours at 1-hour increments.
Decreases cycle duration with less water
Accel 2 *
consumption.
Stealth* Reduces sound rating by 3 dBA increasing
wash time of selected cycle.
*Depending on model
1Sanitizes as per NSF/ANSI standard 184 for residential
dishwashers.
2Shortened cycle time impacts drying performance.
DESCRIPTION ACTIVATION
Press the Half Load button 1 time to activate the Upper
Half Load, 2 times to activate the Lower Half Load or 3
times to activate the Half Load option on both upper and
lower racks. The corresponding indicator will also
appear on the display. Press the "Start/Pause" button
and close the door within 4 seconds to activate the
option.
Press the Sanitize button until the LED light comes on.
The corresponding indicator will also appear on the
display. Press the "Start/Pause" button and close the
door within 4 seconds to activate the option. At the end
of a successful sanitization, the corresponding indicator
will light up. If the washing cycle is interrupted or
adequate water heating cannot be achieved, the
sanitizing LED may not light.
Press the Scrub button until the LED light comes on.
The corresponding indicator will also appear on the
display. Press the "Start/Pause" button and close the
door within 4 seconds to activate the option.
Press the Extra Dry button until the LED light comes on.
The corresponding indicator will also appear on the
display. Press the "Start/Pause" button and close the
door within 4 seconds to activate the option.
Press the "+" button to delay the cycle start time by 1
hour. The display will show cycle duration and
programmed delay time alternately for 2 seconds.
Continue to press "+" until you reach the desired delay
time. Press the "-" button to decrease the delay time.
The corresponding indicator will also appear on the
display. Press the "Start/Pause" button and close the
door within 4 seconds to activate the option.
Press the Accel button until the LED light comes on.
The corresponding indicator will also appear on the
display. Press the "Start/Pause" button and close the
door within 4 seconds to activate the option.
Press the Stealth button until the LED light comes on.
The corresponding indicator will also appear on the
display. Press the "Start/Pause" button and close the
door within 4 seconds to activate the option.
41