Domo DO2014G Mode D'emploi page 42

DO2014G
PARTS
A. Control panel
B. Revolving plate
C. Revolving plate ring
D. Glass revolving plate
E. Display window (for viewing inside)
F. Door
G. Safety lock
H
H. Microwave guide
I. Grill rack
I
ASSEMBLY OF THE REVOLVING PLATE
First place the revolving plate ring in the middle of your microwave oven.
Place the revolving plate on the ring; make sure that the middle of the revolving ring
fits in the revolving plate support.
Never place the revolving plate upside down. Always make sure that the revolving
plate can turn freely steeds, without obstruction.
The revolving plate and ring must be used at all times during cooking.
All food and containers must, at all times, be placed on the glass plate during cooking.
When the glass plate or the ring display any cracks, you should immediately get in
touch with your nearest service centre.
ASSEMBLY
Remove all packaging material and the accessories.
Examine the oven for any possible damage such as dents or damaged door. Do not use
the oven if it is damaged.
1. Choose a spot to place your microwave where there is sufficient space to allow for
the free circulation of air.
Make sure that a minimum distance of 10 cm is kept on the left and right-hand sides,
and any cupboard. One side of the microwave must be left completely open. The rear
surface of appliance should be placed against a wall.
An open space of at least 30 cm must be allowed above the microwave oven.
2. Never remove the legs underneath your oven.
3. Blocking the air intake and outlet can lead to damage to your appliance.
4. Keep the oven as far as away as possible from radio and TV.
5. Plug your oven into the socket, always check whether the voltage in your home
corresponds to the voltage stated on your appliance.
42