WIKA S-10 Mode D'emploi page 23

10. Specifications
Specifications
Electrical connection
Short-circuit resistance
Reverse polarity protection
Insulation voltage
Materials
Wetted parts
Non-wetted parts
CE conformity
Pressure equipment directive
RoHS directive
EMC directive, EN 61326 emission (group 1, class B) and interference immunity (industrial application)
The existence of strong electromagnetic fields in a frequency range of < 2.7 GHz can result in increased measuring errors up to 1 %. Do
not install the instruments in the vicinity of strong electromagnetic sources of interference (e.g. transmitting devices, radio equipment),
or use sheath current filters where applicable.
For further specifications see WIKA data sheet PE 81.01 and the order documentation.
WIKA operating instructions pressure transmitter, model S-10
S+ vs. U-
U vs. U-
+
DC 500 V
Stainless steel
Case
Internal pressure transmission medium
Clamping nut
Angular connector
O-rings at the clamping nut
Flat gasket
Stainless steel
Synthetic oil
Instruments with a measuring range of >
25 bar relative do not contain any pressure
transmission medium (dry measuring cell).
PA
PA
NBR
VMQ
EN
23