General Information - WIKA intelliTHERM TGT73.100 Mode D'emploi

1. General information

1. General information
The model TGT73 intelliTHERM gas-actuated thermometer
■
described in the operating instructions has been designed and
manufactured using state-of-the-art technology. All components
are subject to stringent quality and environmental criteria during
production. Our management systems are certified to ISO 9001 and
ISO 14001.
These operating instructions contain important information on
■
handling the instrument. Working safely requires that all safety
instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and
■
general safety regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept
■
in the immediate vicinity of the instrument and readily accessible to
skilled personnel at any time.
Skilled personnel must have carefully read and understood the
■
operating instructions prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused
■
by using the product contrary to its intended use, non-compliance
with these operating instructions, assignment of insufficiently
qualified skilled personnel or unauthorised modifications to the
instrument.
The general terms and conditions contained in the sales
■
documentation shall apply.
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet: TV 17.10
WIKA operating instructions model TGT73 (Ex)
www.wika.de / www.wika.com
EN
5