System Q Setting; Switching Preout; Built-In Amp Mute Setting; Sirius Id (Esn) Display - Kenwood KDC-X579 Mode D'emploi

Menu system
Function of the KDC-X579

System Q Setting

Setting whether the display indicates the System
Q factors (Bass center frequency, Bass Q factor,
Bass extend, Middle center frequency, Middle
Q factor, and Treble center frequency) in Audio
control.
Display Setting
"System Q ON" The System Q factors are displayed.
"System Q OFF" The System Q factors aren't displayed.
Function of the KDC-MPV525/KDC-MPV5025/
KDC-MP425
In Standby mode

Switching preout

Switching the preout between the rear and
subwoofer. (In subwoofer it outputs without
effect from the fader control.)
Display Setting
"SWPRE Rear" Rear preout.
"SWPRE Sub-W" Subwoofer preout.
Function of the KDC-X579
In Standby mode

Built-in Amp Mute Setting

Toggles ON or OFF the mute control on the built-
in amplifier.
Turning ON this control enhances the preout
quality.
Display Setting
"AMP Mute OFF" The built-in amplifier activates.
"AMP Mute ON" The built-in amplifier deactivates.
In SIRIUS tuner source

SIRIUS ID (ESN) display

Displaying the SIRIUS ID (Electronic Serial
Number) display.
26
|
English
Display
"ESN = ************"
• Serial & SIRIUS ID (ESN)
It is especially important to retain the unit serial
number and the electronic SIRIUS Identification
number for service activation and potential future
service changes.
Function of the KDC-X579/KDC-MPV5025
In SIRIUS Tuner, External disc, or Auxiliary input
source

Dual Zone System

Makes the sound different for the front channel
and rear channel.
Display Setting
"Zone 2 OFF" The front and rear are the same source sound.
"Zone 2 ON" The front and rear are the different source sound.
• When the Dual Zone System is on, there is only sound
effect including Audio control for internal source.
• When you set the Dual zone system to ON while the
sub woofer preout is switched ON, the sound of the
sub woofer preout isn't output.
• When the source is selected to VZ-7000P/N (optional
accessory), the VZ-7000P/N's sound is not output if the
Dual Zone System is turned ON.
Function of the KDC-X579/KDC-MPV5025
When the Dual Zone System is OFF

Dual Zone System Setting

Setting the Front channel and Rear channel
sound in the Dual Zone System.
Display Setting
"Zone 2 Rear" The front is this unit's internal source, and the rear
is selected source sound.
"Zone 2 Front" The rear is this unit's internal source, and the front
is selected source sound.