Touch Sensor Tone; Manual Clock Adjustment; Selectable Illumination; Contrast Adjustment - Kenwood KTS-MP400MR Mode D'emploi

Touch Sensor Tone

Setting the operation check sound (beep sound)
ON/OFF.
Display Setting
"Beep ON" Beep is heard.
"Beep OFF" Beep canceled.

Manual Clock Adjustment

1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
2
Enter Clock Adjust mode
Press the [4] or [¢] button for at least 1
second.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit Clock adjustment mode
Press the [MENU] button.

Selectable Illumination

Selecting the button illumination color as green
or red.
Display Setting
"Button Red" The illumination color is red.
"Button Green" The illumination color is green.

Contrast Adjustment

Adjusting the display contrast.
Display and Setting
"Contrast 0"
"Contrast 10"

Dimmer

Dimming this unit's display automatically when
the light switch is turned ON.
Display Setting
"Dimmer ON" The display dims.
"Dimmer OFF" The display doesn't dim.
Function of the KTS-MP400MR

System Q Setting

Setting whether the display indicates the System
Q factors (Bass center frequency, Bass Q factor,
Bass extend, Middle center frequency, Middle
Q factor, and Treble center frequency) in Audio
control.
Display Setting
"System Q ON" The System Q factors are displayed.
"System Q OFF" The System Q factors aren't displayed.
Function of the KTS-300MR

Switching preout

Switching the preout between the rear and
subwoofer. (In subwoofer it outputs without
effect from the fader control.)
Display Setting
"SWPRE Rear" Rear preout.
"SWPRE Sub-W" Subwoofer preout.
23
|
English