Built-In Amp Mute Setting; Sirius Id (Esn) Display; Dual Zone System; Dual Zone System Setting - Kenwood KTS-MP400MR Mode D'emploi

Menu system

Built-in Amp Mute Setting

Toggles ON or OFF the mute control on the built-
in amplifier.
Turning ON this control enhances the preout
quality.
Display Setting
"AMP Mute OFF" The built-in amplifier activates.
"AMP Mute ON" The built-in amplifier deactivates.
In SIRIUS tuner source

SIRIUS ID (ESN) display

Displaying the SIRIUS ID (Electronic Serial
Number) display.
Display
"ESN = ************"
• Serial & SIRIUS ID (ESN)
It is especially important to retain the unit serial
number and the electronic SIRIUS Identification
number for service activation and potential future
service changes.
24
|
English
In SIRIUS Tuner, External disc, or Auxiliary input
source

Dual Zone System

Makes the sound different for the front channel
and rear channel.
Display Setting
"Zone 2 OFF" The front and rear are the same source sound.
"Zone 2 ON" The front and rear are the different source sound.
• When the Dual Zone System is on, there is only sound
effect including Audio control for internal source.
• When you set the Dual zone system to ON while the
sub woofer preout is switched ON, the sound of the
sub woofer preout isn't output.
When the Dual Zone System is OFF

Dual Zone System Setting

Setting the Front channel and Rear channel
sound in the Dual Zone System.
Display Setting
"Zone 2 Rear" The front is this unit's internal source, and the rear
is selected source sound.
"Zone 2 Front" The rear is this unit's internal source, and the front
is selected source sound.