Kohler K-1418-AH Guide De Propriétaire page 5

Activates Mode Selected
Rotate outer ring to
access desired mode.
Chromatherapy - Specific Color
User Keypad
Available modes will be illuminated in blue. Active modes will be illuminated in green.
Turns the whirlpool pump on and off. Icons illuminated in blue indicate available
Power
modes/features. Modes which are operating will be illuminated in green.
Outer Ring Rotate the outer ring to the desired mode. The selected mode will flash blue.
OK Activates the desired mode.
When illuminated, the adjustable jet water flow can be adjusted by pressing the up or
Flexjet Flow
Mode down arrow.
Up Arrow Increases the water flow when the Flexjet flow mode is active.
Indicator Bar Displays the water flow volume in the Flexjet flow mode.
Effervescence Ports activate to provide a gentle, soothing bubbling action. The Flexjet mode will
Mode automatically turn off when this mode is activated.
Down Arrow Decreases the water flow when the Flexjet flow mode is active.
Chromatherapy Chromatherapy lights will automatically and continuously cycle through the eight colors:
Cycle white, violet, indigo blue, aqua blue, green, yellow, orange, and red. One cycle through all
eight colors takes approximately one minute.
Heater Automatically engages when the power icon is selected. Rotate the outer ring until the
heater mode is flashing, then press OK to turn the heater off. Press OK again to turn the
heater back on.
Chromatherapy - Press OK to activate, then use the up or down arrow to reach the desired color. Press OK
Specific Color while the chromatherapy cycle is active to turn off the chromatherapy lights.
Kohler Co.
Flexjet Flow Mode
Power On/Off
Increases Flow or Pulse
Indicator Bar
Effervescence Mode
Decreases Flow or Pulse
Chromatherapy Cycle
Heater On/Off
5 1023248-5-C