SCHUBERTH C3 PRO Mode D'emploi page 36

D. THE HELMET
VENTILATION SYSTEM 3 –
HEAD VENTILATION
There is a large air inlet cowl with a three-stage
adjustable ventilation system on the top of the helmet
shell for ventilating the top of your head. Air entering
the helmet through this inlet cowl is directed via
channels to the top of the head. Inside the helmet,
the head padding system enables direct contact
between incoming air and the surface of the head,
thereby conducting theheat away from the inside
of the helmet quickly. The ventilation is adjusted by
means of a slide on the air inlet cowl that is easy to
operate even when wearing gloves. Moving the slide
backwards to the first locking position produces
partial ventilation, moving it further back opens the
air inlet to its full extent.
Summer and winter adjustment flaps
The ventilation of the C3 PRO can also be adjusted
to suit the seasons, weather conditions or your
personal preferences. While you will prefer the
cooling air current to flow directly on to your head
in summer in autumn/winter you can reduce the
volume of incoming cold air, or divert it, by covering
the ventilation channels with the flaps of the crown
liner. To do so, raise the middle section of the crown
liner slightly and fold out the fabric flaps located
behind the front section.
36