Descaling Your Brewer - Keurig HOT PLUS Série Guide D'utilisation Et D'entretien

DESCALING YOUR BREWER

Before you begin, you will need a large mug, fresh water, Keurig
access to a sink. Do not use a paper cup.
• Empty the water from the Water Reservoir. If there is a Keurig
and set aside.
STEP 1: FIRST DESCALING SOLUTION RINSE
• Press and hold the Power button to power the brewer off.
• Pour the entire bottle of Keurig
fill the empty bottle with water and pour into the Water Reservoir. Press and hold
the Power Button to turn the brewer back on.
• Place a large mug on the Drip Tray and run a cleansing brew by lifting and lowering
the Handle, selecting a 10 ounce Brew Size and pressing the Brew Button. The brewer
will stop dispensing after 10 ounces. Do not use a Keurig brand pod. Pour the contents
of the mug into the sink.
STEP 2: SECOND DESCALING SOLUTION RINSE
• Repeat the cleansing brew process until the Touch Display indicates "More Water Please."
Let the brewer stand for at least 30 minutes while still on.
• After 30 minutes, discard any residual solution and rinse the Water Reservoir thoroughly.
STEP 3: FRESH WATER RINSE
• Ensure the Water Reservoir is filled with fresh water to and not beyond the MAX FILL line.
• Place a large mug on the Drip Tray and run a cleansing brew. Pour the contents of the mug
into the sink.
• Repeat the cleansing brew process at least 12 times. You may need to refill the Water
Reservoir at least one time during this process.
NOTE: If "Time to descale the brewer!" is still indicated after completing the procedure, repeat the descaling procedure above.
Descaling Solution into the Water Reservoir. Then
™
35
2 | TIPS & MAINTENANCE
Descaling Solution, and
™
Water Filter, remove
™