Unpacking Your Brewer; Brewer Overview; Helpful Hints - Keurig HOT K-Cup K150 Manuel D'utilisation

P4 20162461 T5274_K150_UCG_FINAL.pdf 4C(CMYK) ZB2319 2016-11-02 Size:8.5X5.5in

Brewer Overview

helpful hints

1. Plug the brewer into its own grounded outlet.
If the electric circuit is overloaded with other
appliances, your brewer may not function
properly. The brewer should be operated on its
own circuit, separate from other appliances.
2. Keep your brewer turned "ON" at all times.
To brew a fresh cup of coffee, tea, hot cocoa, or
other beverage anytime you want, we suggest you
keep your brewer turned "ON" all the time.
However, the brewer is fully programmable so you
can set it to turn on and off automatically to match
your schedule. Or, if you prefer, set the brewer to
automatically turn off after a period of time. Follow
the simple instructions on pages 12–13 to make
using the brewer convenient for you.
3. For the best tasting gourmet coffee, tea or
hot cocoa, Keurig recommends using bottled or
filtered water.
Water quality varies from place to place. If you
notice an undesirable taste in your cup of coffee,
tea, hot cocoa, or other beverage (such as chlorine
or other mineral tastes) we recommend you
consider using bottled water or water from a
filtration system. For best results, carefully follow
manufacturer's instructions when using any water
filtration system.
4. Customize Your Size, Flavor & Brew.
With the choice of over 250 varieties of K-Cup
pods and 5 brew sizes (4 oz., 6 oz., 8 oz.,
10 oz., and 12 oz.) your Keurig brewer gives
®
you endless options to customize the size,
flavor, and brew that's perfect for you. For a
strong, intense cup, select an Extra Bold
K-Cup pod (with up to 30% more ground
®
coffee than regular varieties) and brew the
size that's right for you. The smaller the brew
size, the more intense flavor in your cup. The
larger the brew size, the less intense flavor in
your cup.
5. Brewing into a travel mug.
To brew into a travel mug, simply remove the
Drip Tray Assembly and place the travel mug
on the Drip Tray Base.
6. Descale the brewer regularly.
Please refer to pages 15 and 16 for instructions.

unpacking Your Brewer

Place the brewer box on a large steady surface
1.
(such as a table or countertop) or on the floor.
Open the box.
4
Turn the box on its side with the front of the
2.
box face down.
Reach into the box and grasp the foam insert
® 3.
that contains the brewer.
Carefully pull the foam insert toward you and
4.
out of the box. The brewer will still be encased
in the polyfoam and be on its side.
Remove the top polyfoam packaging material.
5.
Carefully lift the brewer off of the bottom
6.
polyfoam and place it upright on a flat,
steady surface.
Lift plastic bag off of the brewer.
7.
Record the serial number for this brewer on
8.
page 3 of this guide. The serial number can be
found on the side of the brewer box or on the
bottom of the brewer.
Place the brewer upright on a flat, steady
9.
surface. Remove tape holding Water Reservoir
in place.
We recommend you save all packing materials in
case future shipping of the product is necessary.
WARNING:
Keep all plastic bags away
from children.