Pommier 2905140FT Manuel page 7

REPAIR
– For spare parts, repair, refurbishment: contact us.
CONDITIONS FOR USE
Manual version
Coupling :
Use the handle to open the hook and to hitch the trailer.
-
When the eye passes beneath the pin, this activates
the pin's lowering mechanism and locking takes place automatically.
- Check that the coupling is properly locked in place, tab position 2.
- Connect the hook-ups.
Uncoupling
- Disconnect the hook-ups.
- The same operation as above after ensuring the stability of
the trailer.
- If the pin is not raised when the handle is operated, move
the truck to release the traction force and open the coupling again
using the handle.
Remote controlled version
– See instructions on the control unit.
INSTALLATION DIAGRAM
The screws and bolts necessary for fitting are supplied with the coupling
Fig. 2
ONLY USE EYES –
That comply with category D50 (R55) or DIN 50 (DIN 74053)
Use our approved
Tow bar thickness, min. 24 - max. 35
Tightening sequence: refer to diagram G150.
Tightening torque : 41 m. daN.
BNA
NO
DIN
YES
Support plate ref. 29.05926
Screw kit ref. 29.44149
Lock control
2 Closed
tow bars
26C / 26L
G150
1 Open
1 Extended position: unlocked
Control tab
FIG 1
2 Retracted position : locked
7/24