Date Format; Stand-By Settings - Gaggia PLATINUM VISION Mode D'emploi

Date format

To set the date view mode. The modification of this setting adjusts all the parameters that require viewing/setting
the date. Press "date format".
date format
dd/mm/yy
International

STAND-BY SETTINGS

You can set the amount of time the machine waits after the last dispensing to go into stand-by mode.
The default setting is «after 3 hours».
Press "stand-by settings".
stand-by
settings
after 3 hours
1.3.2.2. date format
dd/mm/yy
format
yy/mm/dd
1.3.3. stand-by settings
after 15 min
after 1 hour
When the set time has elapsed, the machine goes
in stand-by.
To exit stand-by mode, press "start". After warming
up and performing a self-test, the machine is once
again ready for use.
American
mm/dd/yy
format
after 30 min
after 3 hours
27