Rear Panel - Vox JamVOX Guide D'installation Et De Configuration

4. OUTPUT LEVEL knob
Adjusts the output level of the rear panel LINE OUTPUT jacks.
If the JamVOX monitor's volume is insufficient, you can connect its LINE OUTPUT
jack to your audio system.
5. PHONES jack
Connect your headphones here.
6. MONITOR LEVEL knob
Adjusts the volume of the internal speakers and the headphones.
7. POWER ON indicator
This will light up when the JamVOX Monitor is connected to your computer via USB, and
the power is on.

Rear panel

Computer
1. USB connector
Use the included USB cable to connect this to the USB connector of your computer.
2. EXPRESSION PEDAL jack
Connect an optional Korg EXP‐2 foot controller here.
3. FOOT SWITCH connector
Connect an optional VOX VFS2 foot switch here.
4. LINE OUTPUT L/R jacks
Connect your audio playback system here.
5. LINE INPUT L/R jacks
Here you can input a line‐level audio signal.
En-6
1 2 3 4
Korg EXP-2
VOX VFS-2
5
OUTPUT
Synthesizer, Audio system etc.
AUX IN
Audio system etc.