Vox JamVOX Guide D'installation Et De Configuration page 12

Step2 Play back a song and cancel the guitar part
Mixer
1
Add song data from your computer to the library by dragging and dropping it into the
Main list.
The following formats of song data can be added to the library and played: WAV
(.wav/.wave), AIFF (.aif/.aiff), MP3 (.mp3), Windows Media Audio (.wma, supported
only in Windows), and AAC (m4a, supported only if QuickTime 7 is installed). Song
data protected by DRM (Digital Rights Management) cannot be played.
2
Double‐click the name of a song you added.
The song will play.
HINT To adjust the volume, use the fader located in the right side of the Mixer.
3
Drag the Progress bar pointer to find the guitar solo within the song, and play it back.
4
Click the GXT button.
The guitar solo will be removed
from the playback.
HINT The effectiveness of the cancella‐
tion will depend on how the gui‐
tar solo is mixed. In the GXT edit
panel, try adjusting the cancella‐
tion effect by dragging the
pointer and the gray area.
HINT You can use the Extract button of the GXT edit panel to isolate and emphasize the
guitar solo in the playback. Using this in conjunction with the Tempo change func‐
tion (which lets you slow down the playback speed without affecting the pitch) can
be helpful when you're practicing.
HINT For details on GXT, click the Help menu item "Owner's Manual..." to access the Jam‐
VOX Owner's manual, and refer to the section "GXT (Guitar XTracktion) function."
En-10
Record button Progress bar
Library
GXT button
Main list
GXT edit panel