Publicité
Les langues disponibles
Les langues disponibles
Listening to a Cassette Tape
Before playback:
z For playback, use normal or low-noise tapes for the best sound.
(Metal or CrO tapes are not recommended.)
z Do not use C-120 tapes or poor-quality tapes, as they may cause mal-
functions.
z Before loading a tape into the cassette compartment, tighten the slack
with a pen or a pencil.
All manuals and user guides at all-guides.com
Playback is possible in TAPE 1 compartment as well as in TAPE 2.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1
3
Open the cassette door by pushing the
area marked " PUSH EJECT".
4
Load a cassette into the TAPE 1 or TAPE
2 cassette compartment.
5
Press the / button to start playback.
When playback is performed using the remote control, press the TAPE 1 or
TAPE 2
To stop playback:
Press the
Fast forward/rewind: (TAPE 2 only)
1
Press the
2.
2
To advance the tape, press the
Caution:
z To remove the cassette, press the
ment.
z Before changing from one tape operation to another, press the
z If a power failure occurs during tape operation, the tape head will remain engaged
with the tape and the cassette door will not open. Wait until power is restored.
2) button to select TAPE 1 or TAPE 2.
button.
(TAPE ) button.
(TAPE ) button, then press the TAPE (1
button. To rewind it, press the
(TAPE ) button, and then open the compart-
General Control (See page 10.)
CD-BP90W
2) button to select TAPE
button.
(TAPE ) button.
ENGLISH
E-18
Publicité
