Comunello SHOWIN S45 10N SH Mode D'emploi page 18

4. DECLARATION
EC Declaration of conformity
Manufacturer Fratelli Comunello S.p.a., Headquarters in Via Cassola (VI), Rosà, Italy, under its sole
responsibility declares that:
• The actuator:
• Showin diametro 45:
Description: electromechanical actuator for awnings and rolling shutters.
• Is compliant with the applicable essential requirements of the following Directives:
Low Voltage Directive 2014/35/EU and the following amendments;
Electromagnetic Compatibility Directive 2014/30/EU and the following amendments.
During the planning and realization the following harmonized rules were applied:
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A2:2019+ A14:2019 + A15:2021
EN 60335-2-97:2006 + A11:2008 + A2:2010 + A12:2015
EN 62233:2008
EN IEC 55014-1:2021 EN IEC 55014-2:2021
EN IEC 61000-3-2:2019+A1:2021 EN IEC 61000-3-3:2013+A1:2019+A2:2021
The EC marking is applied on the last two digits - 11
Luca Comunello
Legal representative of Comunello S.p.a.
Rosà, the 9th of January 2011
18
MS45SM10H0B00S