Installing Stainless Steel Handle - Cavavin C-050WSZ Manuel D'instruction

appliance it is connected to. If you have any questions regarding the type and size of surge
protector needed contact a licensed electrician in your area.
Damages due to power surges are not considered a manufacturer covered defect and will void
your product warranty.
Installing the stainless steel handle
This wine cellar includes a stainless steel handle. To install the handle please follow the below
instructions:
1. Pull away the door gasket in the area where the handle is to be installed on the left side as
shown below in Illustration # 1.
necessary.
2. Align the handle with the screws installed.
screwdriver until the handle sets both flush and secured tightly against the door frame. (DO
NOT over tighten as this will cause damage to the handle assembly).
3. Replace the door gasket to its original position.
4. If you choose not to use the handle supplied, simply follow step 1 to access the installation
screws and remove them and then place the two decorative plugs into the two holes
separately. Continue on to step 3 to replace the door gasket to its original position.
Illustration # 1
1. Gasket
2. Phillips Head Screw
The gasket is easily displaced by hand, no tools are
Tighten the screws using a Phillips head
3. Phillips Head Screw Driver
4. Handle
25
Illustration # 2