What To Do If; Environment Concerns; Packaging Material - AEG KFA58HM Notice D'utilisation

Masquer les pouces Voir aussi pour KFA58HM:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

32

What to do if...

2. Clean the appliance with a moist cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.
WHAT TO DO IF...
Problem
You cannot activate the appli-
ance or operate it.
The residual heat indicator does
not comes on.
If you tried the above solutions and cannot repair the problem, speak to your dealer or the
Customer Care Department. Give the data from the rating plate, three-digit-letter code for
the glass ceramic (it is in the corner of the cooking surface) and an error message that
comes on.
If you operated the appliance incorrectly, the servicing by a customer service technician or
dealer will not be free of charge, even during the warranty period. The instructions about
the customer service and conditions of guarantee are in the guarantee booklet.

ENVIRONMENT CONCERNS

The symbol
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.

Packaging material

The packaging materials are friendly to the environment and can be recycled. The plastic
components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as
household waste at the waste disposal facilities in your municipality.
• Activate the appliance again and set the heat setting in 10
seconds.
• Examine the fuse in the electrical system of the house in the
fuse box. If the fuses blow again and again, speak to qualified
electrician.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone should be hot, speak to the service cen-
tre.
on the product or on its packaging indicates that this product may not be
Possible cause and remedy

Publicité

Table des Matières
loading

Table des Matières