Panasonic RX-ED77 Manuel D'utilisation page 16

Listening en
SELECTOR
Play time
Track number
Play sequence
Programmed track
Total play time of
programmed track
| Listening to CDs |
Selecting and listening to favorite tracks
(Program play)
Up to 36 tracks can be programmed.
{Only from the main unit)
Press E STOP to select the CD mode.
When is displayed, press RANDOM on the remote
control to clear the display.
2 Press +/pp| or —/ q to select desired track.
kj Press eMEMORY to record the selection.
4 Continue programming by repeating steps 2
and 3.
Press P/I I PLAY/PAUSE.
Selected tracks play in the programmed sequence, and play
automatically stops.
To cancel program play:
(From the main unit)
Keep the eMEMORY/ œ CLEAR pressed when CD is in stop mode
until "CLEAR" is displayed.
(From the remote control)
Press B/CLEAR when CD is in stop mode to display "CLEAR".
Program play can also be cleared by pressing & CD OPEN/CLOSE.
When "——:——" is displayed:
Total play time of the programmed tracks exceeds 120 minutes.
When "FULL" is displayed:
36 tracks have already been programmed. No further tracks can be
programmed.
To check programming:
Press À / >| or v / Kd when CD is in stop mode.
The track number and its play sequence can be checked each time
these buttons are pressed.
Memory retention of programmed tracks:
Track programming is retained even if play is stopped or the unit is
turned off.
A displayed "P" indicates that programming is retained in the mem-
ory. EJ