Panasonic RX-ED77 Manuel D'utilisation page 24

HD ee |
= Scie <a"
Using the Play Timer
The clock has a 12-hour display.
Timers A and B can be set and used separately for the play
start/finish times.
Example: Setting CD play from 7:00 A.M. to 8:30 A.M. on play
timer A.
Setting the start and finish times
il Press POWER to turn the unit on.
2 Press TIMER ADJUST to set "ON [A]' or "ON
[B]" flashing.
ee [AH OFF [AON [B}> OFF
Original Display OFF ON
(The display changes each time the button is pressed.)
EJ © Press +/»»1 or —/\¢4 when "ON [AT or "ON
[B}" is flashing to set the start time.
© Press TIMER ADJUST.
Finish time flashes.
(D Press +/»»| or —/ |<< to set the finish time.
© Press TIMER ADJUST.
Display returns to original mode.
When "E" is displayed:
Check whether start and finish are set for the same time.
Programming play
Get the music source ready.
Listening to cassettes: refer to pages 10 to 11.
e When used in combination with the recording timer
Always insert the cassette to be played into deck 1 and display
the (a's) indicator.
Listening to the radio: refer to pages 12 to 13.
Listening to CDs: refer to pages 14 to 16.
Press VOLUME to adjust volume for time of
play.
Setting the timer function
Press PLAY TIMER A (or B) to display "PLAY".
When "E" is displayed:
Check whether the clock has been set (page 9).
Press POWER to turn the unit off.
Programming can be checked when the unit is off (page 27).