Instructions For The Installer; Technical Data; Installing The Appliance; Transportation, Unpacking - Electrolux EUT 11004W Notice D'utilisation

Technical data

Model
Gross capacity (l)
Net capacity (l)
Width (mm)
Height (mm)
Depth (mm)
Energy consumption
Energy class, according to EU
Standards
Freezing capacity (kg/24h)
Rising time (h)
Rated current (A)
Weight (kg)

Installing the appliance

Transportation, unpacking

It is recommended to deliver the
appliance in original packaging, in
vertical position
protective warning on packaging.
After each transportation the appliance
must not be switched on for approx. 4
hours.
Unpack the appliance and check if there
are damages on it. Report possible
damages immediately to the place you
bought it. In that case retain packaging.

Cleaning

Remove every adhesive tape, which
ensure the parts not to move in the
appliance.
Wash the inside of the appliance using
lukewarm water and mild detergent. Use
soft cloth.
After cleaning wipe out the inside of the
appliance.

Instructions for the Installer

(kWh/day)
(kWh/year)
considering the
EUT 11004 W
110
92
595
850
635
0,510
186
A+
14
24
0,7
38

Placement

The ambient temperature has an effect
on the energy consumption and proper
operation of the appliance. When
placing, take into consideration that it is
practical to operate the appliance
between ambient temperature limits
according to the climate class that is
given in the chart below and can be
found in the data label.
Class of climate
SN
N
ST
T
If the ambient temperature goes below
the lower data the temperature of the
cooling compartment can go beyond the
prescribed temperature.
If the ambient temperature goes beyond
the upper data this means longer
electrolux 57
GB
Ambient temperature
+10 ... +32 °C
+16 ... +32 °C
+16 ... + 38 °C
+16 ... + 43 °C