Publicité
Les langues disponibles
Les langues disponibles
Fault
Insufficient vacuum perfor-
mance
Insufficient cleaning result
Speed of suction turbine has in-
creased
Brush does not turn
In case of faults that cannot be remedied using the table below please contact the customer service.
Description
Disk brush, red (medium, standard)
Disk brush, natural (white)
Disk brush, black (hard)
Driver plate pad
Pad, red (medium soft)
Pad, green (medium hard)
Pad, black (hard)
Pad, beige (light grain)
Pad, beige (natural hair proportion)
Suction bar, 850 mm, straight
Suction bar, 850 mm, bent
Set homebase box
Beacon lamp
Fleet Management module
Bag holder
Presweep unit
Mop holder
Spray mop
Pliers for course dirt
Remedy
Wastewater reservoir is full; shut off the appliance and empty the wastewater reservoir
Clean the seals between waste water tank and cover and check for tightness, replace if required.
Check the fluff filter for soiling, clean if necessary.
Clean the vacuum lips on the vacuum bar, turn or replace if required
Check if the vacuum bar is plugged, remove plug if required
Check if the cover on the dirt water discharge hose is closed
Check suction hose for blockages; clean if required.
Check the suction hose for tightness; replace if required.
Check dirt water drain hose to see it is leak-proof.
Check the setting of the vacuum bar.
Attach additional weight (accessory) to the vacuum bar.
Check the brushes for wear, replace if required.
Check the brush type and the detergent for their suitability.
Empty the waste water tank.
Clean the swimmer.
Check / clean the lint trap.
Check suction hose for blockages; clean if required.
Check if the vacuum bar is plugged, remove plug if required
Check if foreign matters block the brushes; remove foreign matter if required.
Accessories
Part no.:
4.905-026.0 For the use with all common cleaning tasks.
4.905-027.0 Made of natural fibres for spot cleaning and polishing.
4.905-029.0 For heavy soiling and for deep cleaning. For robust floorings
4.762-534.0 For cleaning with pads. With quick change coupling and center
6.369-079.0 For cleaning and cleanering of all floors.
6.369-078.0 For cleaning heavily soiled floors and for deep cleaning.
6.369-077.0 With stubborn soiling and for deep cleaning.
6.369-468.0 For polishing and refreshing of hard and flexible floorings.
6.371-146.0
4.777-401.0
4.777-411.0
4.035-406.0
4.039-267.0
4.039-268.0
4.039-269.0
4.039-270.0
4.039-271.0
5.999-045.0
6.999-113.0
Description
only.
lock.
7
EN
-
17
Publicité
