Honda EM4500CXS Manuel De L'utilisateur page 67

6. To avoid accidentally unplugging the remote control cable, secure the cable
to the generator frame with the cable ties as shown.
REMOTE CONTROL CABLE
NOTE:
• Connect the blind connector when not using the remote control.
• Engine will not start unless the blind connector is connected.
PILOT LAMP
Starting the engine with remote control
1. Turn the fuel valve to the ON position.
2. Turn the engine switch to the ON position.
3. Press the start switch untill the pilot lamp comes on.
Stopping the engine with remote control
1. Press the stop switch.
2. Turn the engine switch to the OFF position.
3. Turn the fuel valve lever to the OFF position.
64
CABLE TIES
START SWITCH
STOP SWITCH