Honda EM4500CXS Manuel De L'utilisateur page 32

AC Applications
CAUTION:
• Substantial overloading will switch off the AC circuit breaker.
Marginal overloading may not switch off the AC circuit breaker, but it will
shorten the service life of the generator.
• Be sure that all appliances are in good working order before connecting
them to the generator. Electrical equipment (including lines and plug
connections) should not be defective. If an appliance begins to operate
abnormally, becomes sluggish, or stops suddenly, turn off the generator
engine switch immediately. Then disconnect the appliance, and examine
it for signs of malfunction.
1. (BT type): Set the Voltage Selector Switch to match the voltage requirements
for the appliance.
VOLTAGE SELECTOR SWITCH
2. Start the engine (see page 21).
3. Switch the AC circuit breaker ON.
4. Confirm that the appliance to be used is switched off, and plug in the
appliance.
Most motorized appliances require more than their rated power for startup.
AC CIRCUIT BREAKER
ON
115 V
230 V
ON
PLUG
29