Publicité
Les langues disponibles
Les langues disponibles
Remote control does not work
- No battery or battery empty, replace battery.
- Display does show ambient temperature but the fan is still in standby mode. First
press the on / off button to switch on the fan.
- Remote control is not aimed at the receiving sensor on the fan. Point the remote
control (pointing with the light on the side of the remote control) at the receiving
sensor, next to the display where the ambient temperature is displayed.
Fan vibrates
- Imbalance in fan blade. Clean fan blade carefully with a vacuum cleaner.
Fan gives insufficient capacity
- Air inlet and / or air outlet openings are contaminated. Clean air inlet and air
outlet openings.
Fan display is not working
- Display is switched off. Switch on the display with the "Turn off screen" button.
Warning: Repairs must be carried out by trained technicians. Always ask for
original parts for repairs.
Changes made to the device and improper repairs carried out invalidate the
warranty and liability of the supplier, importer and manufacturer.
Removal
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should
be made suitable for reuse in order to prevent any adverse effects
to health and the environment caused by unregulated waste
collection. Therefore, please make sure that you bring old
equipment to a designated collection point. Alternatively, contact
the original supplier, who can make sure that as many of the
components as possible can be recycled.
28
Publicité
