Publicité
Les langues disponibles
Les langues disponibles
The following functions are shown on the LED display:
1. Fan connected to power supply
2. ION function
3. Timer function set (on / off)
4. Ambient temperature light on/Timer light off
5. Ambient temperature or timer setting (1 to
12h)
6. Oscillate (pivot)
7. Fan speed low
8. Fan speed medium
9. Fan speed high
Cleaning and maintenance
Switch off the fan and remove the plug from the wall socket when you want to clean
it or carry out maintenance. The fan only requires some general, external
maintenance. Dust it regularly with a soft cloth or feather duster or vacuum it with a
soft vacuum cleaner brush. If it is very dirty, clean the fan with a slightly damp cloth.
Dry everything thoroughly, let the fan dry well. Make sure that no water gets onto
parts other than the housing! Never rinse or spray the fan!
To avoid damage, damage or distortion of the material, never use abrasive,
aggressive or corrosive (cleaning) agents.
If you want to clean up the fan at the end of the season, do so in the original
packaging: it offers the best protection. Put it away in a safe, dry, not extremely hot
or cold place.
Problems and solutions
Display shows ambient temperature but the control buttons on the fan do not work
- Display does show ambient temperature but the fan is still in standby mode.
- First press the on / off button to switch on the fan.
Set the number of hours (1 to 12
hours) that the fan must
ventilate. Fan switches off
automatically when the set hours
have elapsed. (Press this button
several times to set the number
of hours, the display shows the
set number of hours).
LED display on / off.
27
Publicité
