Publicité
Les langues disponibles
Les langues disponibles
16818xx1
16808xx1
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Hole size in mounting surface
spray
valves
pull rod
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
•
For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
•
Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
•
Models 16808/16818xx1 require ½" hot
and cold supply lines (not included). Use
braided, flexible hoses. Do not use soft
PEX hoses or rigid metal tubes.
•
For correct function of the faucet, the hot
supply must be on the left and the cold supply
must be on the right.
•
Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
Installation
16510/16511/16803/16805 − See page 6
16808/16818 − See page 16
15 - 75 PSI
15 PSI
10° - 10° F*
176°F*
1.5 GPM
1⅛"
1¼"
1¼"
1½"
Publicité
