Dometic CoolFreeze CFX95DZ Notice D'utilisation page 22

Operation
7.12 Defrosting the cooler
Humidity can form frost in the interior of the cooling device or on the evapo-
rators. This reduces the cooling capacity. Defrost the device in good time to
avoid this.
A
NOTICE! Danger of damage!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooler, proceed as follows:
➤ Take out the contents of the cooling device.
➤ If necessary, place them in another cooling device to keep them cool.
➤ Switch off the device.
➤ Leave the lids open.
➤ Wipe off the defrosted water.
7.13 Replacing the device fuse
D
DANGER! Danger of electrocution!
Disconnect the power supply and the connection cable before you
replace the device fuse.
➤ Disconnect the power supply to the device.
➤ Pull off the connection cable.
➤ Pry out the fuse insert (fig. 4 2, page 4) with a screwdriver.
➤ Replace the defective glass fuse with a new one that has the same rating
(4A 250V).
➤ Press the fuse insert back into the housing.
➤ Reconnect the power supply to the device.
22
CFX95DZ
EN