Dometic CoolFreeze CFX95DZ Notice D'utilisation page 14

Operation
➤ Re-fit center hinge in new position.
➤ Insert the lids in the hinges on the opposite side (fig. 6 D, page 5).
Selecting the temperature units
Temperature display units can be switched between Celsius and Fahrenheit
as follows:
➤ Switch on the cooler.
➤ Press the "SET" button (fig. 3 4, page 3) three times.
➤ Use the "UP +" (fig. 3 10, page 3) or "DOWN –" (fig. 3 9, page 3)
buttons to select Celsius or Fahrenheit.
✓ The selected temperature units then appear in both displays for a few
seconds. The displays flash several times before returning to the current
temperature.
7.2 Energy saving tips
 Choose a well ventilated installation location which is protected against
direct sunlight.
 Allow warm food to cool down first before placing it in the cooling device
to keep cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooling device open for longer than necessary.
 Defrost the cooler once a layer of ice forms.
 Avoid unnecessarily low temperatures.
7.3 Connecting the cooler
Connecting to a battery (vehicle or boat)
The cooler can be operated with 12 V or 24 V
A
NOTICE! Danger of damage!
Disconnect the cooler and other consumer units from the battery
before you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
14
.
g
CFX95DZ
EN